PlanetPowder

DirectPlanet™ DTF CleanWith our excellent Directplanet™ DTF cleaning fluid, you can service your DTF machines, clean the capping, wiper and head. You can even, in certain cases, recover a slightly clogged head to restore its full functionality.User guide:Directplanet™ DTF can be applied by dipping a swab into the liquid and wiping around the edges of the caping until the rubber is completely clean.For wiper cleaning, be persistent in cleaning the wiper as, as it is usually black, it is not clear whether it is clean or not.To clean the head, wipe the outer edges of the head with a cotton swab soaked in Directplanet DTF until there is no ink residue.To try to recover a clogged printhead, try dipping the printhead max. 1 millimetre with our pure Directplanet DTF liquid and after 1 hour perform 2 or 3 standard cleanings on your DTF printer model.Important, do not wipe the surface of the nozzles with a cotton swab, as this could clog the printhead...

PlanetFilm™ DTF is a 75µ translucent PET (polyethylene terephthalate) single-use film that is printed on the matt side. Printing with DTF inks on the film causes it to remain wet to allow the DTF powder to adhere.There is no need to cut out the image as it leaves no borders.Features:Size: 0.30x100m and 0.60x100m reel.Roll mandrel diameter: 7.5cm diameter with 3cm adapter.Our film minimises static electricity.Thickness: 75µSingle use film.Suitable for specific DTF printers and also for flatbed DTG printers (Epson F-series, Brother GT/GTX, etc.).Application of PlanetFilm™DTF on textiles.Once printed on PlanetFilm™DTF , with PlanetPowder™ DTF powders and passed through the oven, place the design on the garment and iron according to the type of fabric.Remove the warm or preferably cold film continuously (approx. 15 seconds).Wash in cold water (max. 30°C) inside out.Drying: preferably air-drying or low temperature.Iron inside out...

DirectPlanet™ DTF CleanWith our excellent Directplanet™ DTF cleaning fluid, you can service your DTF machines, clean the capping, wiper and head. You can even, in certain cases, recover a slightly clogged head to restore its full functionality.User guide:Directplanet™ DTF can be applied by dipping a swab into the liquid and wiping around the edges of the caping until the rubber is completely clean.For wiper cleaning, be persistent in cleaning the wiper as, as it is usually black, it is not clear whether it is clean or not.To clean the head, wipe the outer edges of the head with a cotton swab soaked in Directplanet DTF until there is no ink residue.To try to recover a clogged printhead, try dipping the printhead max. 1 millimetre with our pure Directplanet DTF liquid and after 1 hour perform 2 or 3 standard cleanings on your DTF printer model.Important, do not wipe the surface of the nozzles with a cotton swab, as this could clog the printhead...

General information: Inkplanet® Ecoplanet EJX is 100% compatible with Roland EJ ink. Simply remove your original empty cartridge, insert the new InkPlanet cartridge and you're done. It is suitable for all models of Roland Soljet EJ640 printing machines. In addition, you can insert the cartridges one at a time, as you need them. Available in 7 colors: Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta and Light Black. Forget about making color profiles and enjoy your valuable time printing because the original profiles are perfect for Inkplanet® ink.The benefits:Significant savings in printing costs. Plug&Print solution. Plug & Print*. 1 litre cartridges, available in 7 colours and colour and gloss matching with the original ink. Fast drying and odourless thanks to its ecological solvent base. Excellent grip and durability of up to 3 years on all standard materials. Tested on monomeric, polymeric, cast, microperforated, acidic vinyl... Spectacular quality, achieves vibrant colors and solid masses. Longer duration of the heads and the ink circuit.In our tests we have been able to verify in 100% of the cases a duration of the head equal and in most of the cases superior to the original one. Inkplanet® guarantees the ink circuit of your machine, we are so sure of our quality that if our ink produces any kind of damage in your valuable machine, we commit to repair it without any cost**.Formats: We pack in the format of 1 litre cartridges. Valid for models: Soljet EJ-640* For machines with OEM ink. **Guarantee applicable to all ranges Ecoplanet™, and only if the machine is previously in perfect condition, that the previous ink is original or otherwise, that has been made a cleaning of the circuit assisted by our technicians. Nor will we offer guarantee on machines with poor user maintenance or in the event of negligence on the part of the printer...

General information: Inkplanet® Ecoplanet™ Max is 100% compatible with Roland Ecosol-Max ink. Simply remove your original empty cartridge, insert the new Inkplanet® cartridge and you're done. It is suitable for all Roland Ecosol-MAX printing machine models with ESL3 ink.  In addition, you can insert the cartridges one at a time, as you need them.   Available in 6 colors: Cyan, Magenta, Yellow, Black, Light Cyan and Light Magenta Forget about making color profiles and enjoy your valuable time printing because the original profiles are perfect for Inkplanet® ink. The benefits:Significant savings in printing costs. Plug&Print solution. Plug & Print*. Colour and gloss consistency with the original ink. Odourless thanks to its ecological solvent base. Excellent grip on all standard materials. Tested on monomeric, polymeric, cast, microperforated, acid vinyl; on glasspack, backlit, canvas, canvas, paper... Fast drying. Less handling or rolling time. Longer duration of the heads and the ink circuit.In our tests we have been able to verify in 100% of the cases a duration of the head equal and in most of the cases superior to the original one. Inkplanet® guarantees the ink circuit of your machine, we are so sure of our quality that if our ink produces any kind of damage in your valuable** machine, we commit to repair it without any cost.Formats: 440ml cartridge1 litre bags 1 litre bottles.Valid for models: VersaCAMM: SP-300/540, SP-300i/540i VersaCAMM: VP-300/540, VP-300i/540i VersaCAMM: VS-300/420/540/640 SOLJET PRO II: SC-500/ 500ex/ 540/ 540ex/ 540ex SOLJET PRO II: SJ-1045is/ 1000/ 740/ 740ex/ 745ex/ 640ex/ 540/ 540ex/ 640ex SOLJET PRO III: XC-540 and XJ-540/640/740 VersaStudio BN-20VersaArt: RS-540/640 and RE-640 SOLJET SJ-500/500ex/600/600ex/645ex* For machines with OEM ink. **Guarantee applicable to all ranges Ecoplanet™, and only if the machine is previously in perfect condition, that the previous ink is original or otherwise, that has been made a cleaning of the circuit assisted by our technicians. Nor will we offer guarantee on machines with poor user maintenance or in the event of negligence on the part of the printer...

General information: Inkplanet® Ecoplanet™ Max2 is 100% compatible with Roland Ecosol-Max2 ink. Simply remove your original empty cartridge, insert the new Inkplanet® cartridge and you're done. It is suitable for all Roland Ecosol-MAX2 printer models with OEM ink - ESL4In addition, you can insert the cartridges one at a time, as you need them.   Available in 7 colors: Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta and Light BlakThe benefits:Significant savings in printing costs. Plug&Print solution. Plug & Print*. Colour and gloss consistency with the original ink. Odourless thanks to its ecological solvent base. Excellent grip on all standard materials. Tested on monomeric, polymeric, cast, microperforated, acid vinyl; on glasspack, backlit, canvas, canvas, paper... Fast drying. Less handling or rolling time. Longer duration of the heads and the ink circuit.In our tests we have been able to verify in 100% of the cases a duration of the head equal and in most of the cases superior to the original one. Inkplanet® guarantees the ink circuit of your machine, we are so sure of our quality that if our ink produces any kind of damage in your valuable** machine, we commit to repair it without any cost.Formats: 440ml cartridge. 1 litre bottles.Valid for models: VersaCAMM: VS-300i/540i/640i VersaStudio BN-20 VersaCAMM: VS-300/420/540/640 SOLJET PRO II: SC-500/ 500ex/ 540/ 540ex/ 540ex SOLJET PRO 4: XF-640 and XR-640 VersaArt:RS-540/640 VersaArt RE-640* For machines with OEM ink. **Guarantee applicable to all ranges Ecoplanet™, and only if the machine is previously in perfect condition, that the previous ink is original or otherwise, that has been made a cleaning of the circuit assisted by our technicians. Nor will we offer guarantee on machines with poor user maintenance or in the event of negligence on the part of the printer...

General information: Inkplanet® Ecoplanet™ Max3 is 100% compatible with Roland Ecosol-Max3 ink. Simply remove your original empty cartridge, insert the new Inkplanet® cartridge and you're done. It is suitable for all Roland Ecosol-MAX3 printer models with OEM ink - ESL5. In addition, you can insert the cartridges one at a time, as you need them.   Available in 7 colors: Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta and Light BlakForget about making color profiles and enjoy your valuable time printing because the original profiles are perfect for Inkplanet® ink. The benefits:Significant savings in printing costs. Plug&Print solution. Plug & Print*. 500ml cartridges available in 7 colours and colour and gloss matching with the original ink. Fast drying and odourless thanks to its ecological solvent base. Excellent grip and durability of up to 3 years on all standard materials. Tested on monomeric, polymeric, cast, microperforated, acidic vinyl... Spectacular quality, achieves vibrant colours and solid masses. Longer duration of the heads and the ink circuit. Translated with www.DeepL.com/Translator (free version)In our tests we have been able to verify in 100% of the cases a duration of the head equal and in most of the cases superior to the original one. Inkplanet® guarantees the ink circuit of your machine, we are so sure of our quality that if our ink produces any kind of damage in your valuable machine, we commit to repair it without any cost**. Formats: 500ml cartridge.1 litre bottles.Valid for models: VersaCAMM: SP-300i/540i VersaCAMM: VP-300/540, VP-300i/540i VersaCAMM: VS-300/420/540/640 VS-300i/540i/640i SOLJET PRO 4: XR-640 - XF-640 VersaExpress: RF-640 SOLJET PRO III: XC-540 and XJ-640/740 VersaStudio BN-20VersaArt: RS-540/640 and RE-640* For machines with OEM ink. **Guarantee applicable to all ranges Ecoplanet™, and only if the machine is previously in perfect condition, that the previous ink is original or otherwise, that has been made a cleaning of the circuit assisted by our technicians. Nor will we offer guarantee on machines with poor user maintenance or in the event of negligence on the part of the printer...