DTF Products

DirectPlanet™ DTF CleanWith our excellent Directplanet™ DTF cleaning fluid, you can service your DTF machines, clean the capping, wiper and head. You can even, in certain cases, recover a slightly clogged head to restore its full functionality.User guide:Directplanet™ DTF can be applied by dipping a swab into the liquid and wiping around the edges of the caping until the rubber is completely clean.For wiper cleaning, be persistent in cleaning the wiper as, as it is usually black, it is not clear whether it is clean or not.To clean the head, wipe the outer edges of the head with a cotton swab soaked in Directplanet DTF until there is no ink residue.To try to recover a clogged printhead, try dipping the printhead max. 1 millimetre with our pure Directplanet DTF liquid and after 1 hour perform 2 or 3 standard cleanings on your DTF printer model.Important, do not wipe the surface of the nozzles with a cotton swab, as this could clog the printhead...

PlanetFilm™ DTF is a 75µ translucent PET (polyethylene terephthalate) single-use film that is printed on the matt side. Printing with DTF inks on the film causes it to remain wet to allow the DTF powder to adhere.There is no need to cut out the image as it leaves no borders.Features:Size: 0.30x100m and 0.60x100m reel.Roll mandrel diameter: 7.5cm diameter with 3cm adapter.Our film minimises static electricity.Thickness: 75µSingle use film.Suitable for specific DTF printers and also for flatbed DTG printers (Epson F-series, Brother GT/GTX, etc.).Application of PlanetFilm™DTF on textiles.Once printed on PlanetFilm™DTF , with PlanetPowder™ DTF powders and passed through the oven, place the design on the garment and iron according to the type of fabric.Remove the warm or preferably cold film continuously (approx. 15 seconds).Wash in cold water (max. 30°C) inside out.Drying: preferably air-drying or low temperature.Iron inside out...

PlanetPowder™ DTF is a low temperature white polyamide powder for application over fresh DTF ink printed on PET film. Features:High strength rivalling traditional adhesives, PlanetPowder™ DTF hot melt powder offers an excellent choice for a variety of materials such as T-shirts, bags, hats, shoes, etc.PlanetPowder™ DTF powder is highly cost effective and allows for fast and wide coverage of the printed surface of the film with minimal expense.Ironing temperature cotton: from 130ºC to 150ºC.Ironing temperature synthetic fabrics: from 130ºC.Ironing time cotton: from 12 to 15 seconds.Ironing time synthetic fabrics: 8 to 12 seconds.Ironing pressure: medium-high (1,5-2,5Kg/cm²).Application with the Inkplanet DTF range on fabrics.Once printed on PlanetFilm™DTF , with PlanetPowder™ DTF powders and passed through the oven, place the design on the garment and iron according to the type of fabric.Remove the warm or preferably cold film continuously (approx. 15 seconds).Wash in cold water (max. 30°C) inside out.Drying: preferably air-drying or low temperature.Iron inside out...